430 Differences in carbon calipers?

Well, here is my 2005, which has the option added in from factory:

Image Unavailable, Please Login

 

Well hot dang. I guess someone was drinking too much when they stickered them!

Mine look exactly the same. Wacky and thanks for confirming. I was about to have it stripped and re-done! Hell, I may still do that.

 

There is some kind of logic here.
On all the calipers Ferrari should be read from top to bottom (the F is on the side of the bleeding screws)

 

Mark earlier noted that, in general (never say always with Ferrari), the 398 mm front rotor calipers had the Brembo text (Scud/16M, 575M HGTC, 599, later mid-engines) while the 380 mm front rotor calipers did not (CS, F430, 612).

Eric has it correct on the rotors. Sounded backwards to me, so the decals on my Mov'It ceramics are not that way. Both laid out reading from the rotor side.


Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

I remember you helping me on this

 

Apologies for being off-topic. Im trying to in contact with you regarding a TCU upgrade. If you could please email me that would be great. [email protected]

 

Terry,

Tried to PM you on this but no joy.

I seem to remember a list (possibly in Excel) of changes to F430 by VIN, MY, and Assy number. I can't relocate it. Was that you who posted it?

I know you did one for the 575.

Thanks,

Ray

 

Here is one Word version I did very quickly and a more thorough Xcel version by Mark Stewart.

 

Thank you, sir!

I need to know when they switched to the MKII headers as I'm trying to buy a pair of manifolds.

Thanks again!

Ray