News

Dino 246 interiordoor panels.

Discussion in 'Technical Q&A' started by dm_n_stuff, May 21, 2004.

  1. dm_n_stuff

    dm_n_stuff Global Moderator
    Global Moderator Lifetime Rossa Owner

    Dec 10, 2003
    35,469
    The Sunshine State
    Full Name:
    Dave
    Before I wreck the brand new door panels I'm installing, can anyone provide detailed pictures of where, or if, there are any exterior finish screws in the doors on the panels?

    The ones I took off have a half dozen #8 screws with grommets, but, after looking at the back panels, I'm not at all sure they belong there.

    I'm also gonna post this in vitage.

    Thanks,

    Dave
     
  2. To remove this ad click here.

  3. billb

    billb Formula Junior
    Professional Ferrari Technician

    Jun 4, 2001
    407
    Shorewood, IL
    Full Name:
    Bill Badurski
    Dave,
    Checked the Shop Manual, but all it said was to "remove the screws" with no reference to quantity. The Daytona trim panel uses six, plus four more through the speaker grille.
     
  4. dm_n_stuff

    dm_n_stuff Global Moderator
    Global Moderator Lifetime Rossa Owner

    Dec 10, 2003
    35,469
    The Sunshine State
    Full Name:
    Dave
    Bill.

    Looks like 6 or seven depending on who I ask. I think they may have added some to my door along the way to keep the old panels from falling apart.

    Guess this saves me a trip to the FCA tech tips.

    thanks,

    Dave
     

Share This Page