Dino 308 GT4 Script / Badge | FerrariChat

Dino 308 GT4 Script / Badge

Discussion in '308/328' started by IAA1963, May 18, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. IAA1963

    IAA1963 Rookie

    Sep 20, 2016
    7
    #1 IAA1963, May 18, 2019
    Hi,

    When I bought my 308GT4, it came without the badge on the rear bonnet. I was searching for a NOS badge for the rear bonnet for quite some time. Now I have the correct one, but I don‘t know the exact mounting position as the two holes are gone. So would be great to get some infomation regarding the original mounting position.

    I will mount the Dino GT4 Badge only. I will not add the Ferrari script. I think this is correct for a 1976 model, right?

    Thank you,
    Mark
     
  2. del.gil

    del.gil Rookie

    Jul 30, 2010
    20
    Paris
    #2 del.gil, May 18, 2019
    Normally, you should add « Dino308gt4 », no?
    Did you try to use a high power light inside the bonnet to be able find the 2 holes with the transparency of the paint?
     
  3. absostone

    absostone F1 Veteran
    Silver Subscribed

    Jul 28, 2008
    9,238
    #3 absostone, May 18, 2019
    look from inside the trunk
     
  4. Brian Harper

    Brian Harper F1 Rookie
    Owner Silver Subscribed

    Feb 17, 2006
    4,078
    San Jose area
    Full Name:
    Brian Harper
    #4 Brian Harper, May 19, 2019
    I had the same issue. I peeled the covering from the inside of the trunk lid and could find the Bondo squishing out from the original holes. I drilled from the inside out to put the holes back in.
     
  5. IAA1963

    IAA1963 Rookie

    Sep 20, 2016
    7
    #5 IAA1963, May 20, 2019
    I have removed the cover inside the trunk, but I do not see the former holes from the badge.
     

Share This Page