Dino BOOT/ENGINE/PETRO lever back plate | FerrariChat
Buy

Dino BOOT/ENGINE/PETRO lever back plate

Discussion in '206/246' started by raywong, Oct 12, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. raywong

    raywong Formula Junior

    Aug 29, 2004
    673
    Hong Kong
    Full Name:
    Raymond
    #1 raywong, Oct 12, 2004
    The BOOT/ENGINE/PETRO lever back plate. Superformance selling an aluminum version for £85.00 which seem a little expensive. I couldn't find the original plastic version. Any idea?
     
  2. dm_n_stuff

    dm_n_stuff Four Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2003
    43,715
    26.806311,-81.755805
    Full Name:
    Dave M.
    #2 dm_n_stuff, Oct 12, 2004
    http://ferrarichat.com/forum/showpost.php?p=134457500&postcount=3

    Ray. Do some digging, they are out there, although Ferrari doesn't show the plate as an available separate part. Dennis McCann would be the best bet, I think.

    Also, may as well get used to it, prices for Dino parts in particular, and Ferrari in general, can be pretty staggering.
     
  3. raywong

    raywong Formula Junior

    Aug 29, 2004
    673
    Hong Kong
    Full Name:
    Raymond
    #3 raywong, Oct 12, 2004
    looked again. I guess the aluminum plate is the best bet.
     
  4. dm_n_stuff

    dm_n_stuff Four Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2003
    43,715
    26.806311,-81.755805
    Full Name:
    Dave M.
    #4 dm_n_stuff, Oct 13, 2004
  5. raywong

    raywong Formula Junior

    Aug 29, 2004
    673
    Hong Kong
    Full Name:
    Raymond
    #5 raywong, Oct 13, 2004
    Dave, you good!!
     
  6. T.O. Dino

    T.O. Dino Formula Junior

    Oct 30, 2004
    350
    Toronto Canada
    #6 T.O. Dino, Nov 1, 2004
    Just purchased one from Dennis McCann a couple of month ago.
     
  7. raywong

    raywong Formula Junior

    Aug 29, 2004
    673
    Hong Kong
    Full Name:
    Raymond
    #7 raywong, Nov 2, 2004
    I only need the plastic back plate, don't want to pay $300 for the whole assembly!

    I will try to fix it with some fibre glass cloth, can you tell me how I can detach it from the car?
     
  8. T.O. Dino

    T.O. Dino Formula Junior

    Oct 30, 2004
    350
    Toronto Canada
    #8 T.O. Dino, Nov 24, 2004
    If it broke once it will break again. It just means that the plastic has gotten hard. It will most likely break more once you get it off. Just two screws at the base of the pull assembly.
     
  9. raywong

    raywong Formula Junior

    Aug 29, 2004
    673
    Hong Kong
    Full Name:
    Raymond
    #9 raywong, Nov 25, 2004
    I will put it back piece by piece tag glue them together with a little CA, place a thick glass fibre cloth on the back, apply epoxy on the cloth and let dry. It will be stronger than new.
     
  10. T.O. Dino

    T.O. Dino Formula Junior

    Oct 30, 2004
    350
    Toronto Canada
    #10 T.O. Dino, Nov 25, 2004
    OK
     

Share This Page