dino dash removal | FerrariChat
Buy

dino dash removal

Discussion in '206/246' started by champtc, Jan 28, 2005.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. champtc

    champtc Formula Junior

    Apr 18, 2004
    732
    #1 champtc, Jan 28, 2005
    I am in the process of removing the dash from my '74 Dino 246 GTS. I have pulled the steering wheel & removed the nut (after I bought the special socket). It appears that I have to put a 3 eared puller on the hub to now pull it off. I think I have to mark all the electrics & pull the dash but it looks complicated. I would be very appreciative of any info that anyone has in a step by step procedure to pull the dash. I am re-doing my interior and thought I might as well do the dash while I was "at -it" Thanks Champ
     
  2. racerboy9

    racerboy9 F1 Rookie
    Silver Subscribed

    Nov 3, 2003
    2,642
    #2 racerboy9, Jan 28, 2005
    Most of the electrical connections are by gang plugs which makes re-connecting much easier. I love a digital camera for this stuff as I can take loads of pictures to refresh my memory. Short of that, there are only a few loose wires to keep track of and masking tape with whatever code you wish to put on them for identification should take care of it.
     

Share This Page