Dino indicator lights | FerrariChat
Buy

Dino indicator lights

Discussion in '206/246' started by yakxx21, May 12, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. yakxx21

    yakxx21 Karting

    Jun 29, 2013
    230
    #1 yakxx21, May 12, 2015
    Im wondering if this is normal....I have purchased new rubber seals for the front indicators and find when fitted they are flush with the top and sides ...but not possible to get the lower part flush...they stick out a little and its annoying.....maybe this is normal, certainly the weather seal is good but it feels wrong..
    anybody else replaced their front indicator light seals (white colour) ....and had the same problem

    any trick ??
     
  2. simonc

    simonc Formula Junior

    Nov 1, 2003
    884
    Herfordshire, UK
    Full Name:
    Simon Campbell
    #2 simonc, May 12, 2015
    Same problem on mine. I have tried the white seals from Superformance and from Cicognani and they are both the same. I thought that maybe it is my lenses and even tried a new set from Superformance but it made no difference.
     
  3. racerboy9

    racerboy9 F1 Rookie
    Silver Subscribed

    Nov 3, 2003
    2,651
    #3 racerboy9, May 12, 2015
    I had the same problem and didn't use them, they are too thick. Luckily I had some originals that worked great.
     
  4. isuk

    isuk F1 Rookie

    Nov 11, 2005
    3,334
    UK
    Full Name:
    Iain
    #4 isuk, May 13, 2015
    Last edited by a moderator: Sep 7, 2017
    I've used the Superformance seals on all of my cars and they fit perfectly flush on every one. My bodyshop installed them and I remember asking about this after the issue was raised a while back and they said they are absolutely spot on to work with and nothing needs to be adjusted. If installed incorrectly they can appear to be the wrong thickness. I don't have any photo's of them on the housings before being the lights were fitted to the car unfortunately but I'm sure there will be some in some of omgjon's threads.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     

Share This Page