Dino number plate light switch

Hi

I was wondering if anyone out there could email me a clear picture of the number plate light contact on the trunk of a 246.
I have something missing and can't figure it out I need to see a clear photo of the underside of the trunk lid and the switch on the rear panel. It would really help.

[email protected]

Thanks

Adam

 

what light applies depends on the series of Dino...it's totally different for early (L * M-series) than it is for E-series.

 

A quick search shows several threads with good pics, like this
http://www.ferrarichat.com/forum/206-246/149166-trunk-lighting-electrical-help.html

 

Hi thanks for the photos, yes I am looking at the contact plate on the trunk lid. I have the lower spring loaded pin. Just to clarify is the base plate that's screwed to the trunk lid plastic then the contact plate a plain washer?

Also on the photo you can see the top of the latch and the screws that retain the latch, I though the rear trim would have fitted more snug to the back panel ( to hide the latch)
Am I trying to hard to get this to look right ?

 

May be better if you post pics of what you have got. Someone will surely chime in and tell you if its wrong

 

Hi thanks for your help

 

It seems many Dinos are different, here is 05082 with a bracket for its new batchboard
Image Unavailable, Please Login

 

Thanks, I figured it out there was a metal plate screwed directly to the post on the trunk lid, the plate couldn't touch the pin I got in the trunk with a torch to look (I'm 6'2" so it was a tight squeeze)
I fitted a thick piece of Bakelite to the post and then mounted the plate, it's fairly tidy and the licence plate lights now work and don't blow the fuse.
I don't seen to have that plate on the rear panel I might look for tell tale marks to see if it used to exist.