Dino Seat Belt Buckle needed | FerrariChat
Buy

Dino Seat Belt Buckle needed

Discussion in '206/246' started by 410SA, Sep 25, 2005.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 410SA

    410SA F1 Veteran

    Nov 2, 2003
    8,511
    West Coast
    Full Name:
    A
    #1 410SA, Sep 25, 2005
    My 246 driver side seat belt has a faulty buckle. It will not hold the belt under pressure. The belt clips in just fine and stay in, but any pressure, like pulling on the belt will disengage it. This pretty much makes it useless. Does anyone know of a source for Dino seat belt hardware?
     
  2. dm_n_stuff

    dm_n_stuff Four Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2003
    43,715
    26.806311,-81.755805
    Full Name:
    Dave M.
    #2 dm_n_stuff, Sep 26, 2005
    PM sent.
     
  3. synchro

    synchro F1 Veteran

    Feb 14, 2005
    9,294
    CHNDLR
    Full Name:
    Scott
    #3 synchro, Sep 26, 2005
    I also need the rod for the shoulder belt metal clip assembly, any ideas?

    This is the metal rod that the shoulder webbing runs over and through at the fastener of the shoulder belt to lap belt connection. I was thinking I had to fabricate it but wondered about if anyone else had a spare one.

    Scott
     
  4. synchro

    synchro F1 Veteran

    Feb 14, 2005
    9,294
    CHNDLR
    Full Name:
    Scott
    #4 synchro, Sep 26, 2005

Share This Page