Dinoplex | FerrariChat

Dinoplex

Discussion in '365 GT4 2+2/400/412' started by tr0768, Jun 15, 2012.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. tr0768

    tr0768 Formula Junior

    Oct 28, 2008
    736
    Lake Stevens Washington
    Full Name:
    Howard Musolf
    Looking to buy a used Dinoplex for my 1982 400i. Anyone have a spare for sale?

    Howard Musolf
    1981 308gtsi
    1982 400i Cabriolet
    1988 Lotus Esprit Turbo
     
  2. anxpert

    anxpert Formula Junior

    Mar 4, 2008
    970
    Oceanside, CA
    Full Name:
    Enrique Mar
    The car I purchased had sporadic starting problems which where resolved by installing an MSD and supplying +12 VDC a bit different than stock.

    I've experienced a few electrical " gremlins " which could have been the starting problems Vs. the Dinoplex.

    Regardless, I'm quite content with the MSD and you are welcome to my old Dinoplex. It could very well be defective, but it's free !

    PM me if you are interested .
     
  3. alhbln

    alhbln Formula 3
    Consultant Owner

    Mar 4, 2008
    1,749
    Berlin, Germany
    Full Name:
    Adrian
    Starting problems are rarely indicating a defect of a AEC104B-660, but rather point to a partially broken VR sensor or defective VR sensor wiring/corroded contacts between the VR sensor and the AEC104B.
    If the AEC104B-660 ran well at high RPMs even after the engine compartment heated up then chances are quite good that the AEC104B-600 is ok!
     

Share This Page