"disegno di Pininfarina" badge placement | FerrariChat
Buy

"disegno di Pininfarina" badge placement

Discussion in '206/246' started by mkeith, Feb 6, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. mkeith

    mkeith Rookie

    Mar 15, 2009
    46
    Houston, TX
    Full Name:
    Michael Keith
    #1 mkeith, Feb 6, 2013
    This is for a 74 GTS. It was recently painted; so I ordered all new badges. The car came without the Pininfarina badge on the RH fender, & now I would like to add it. The holes have long since been filled in. Therefore, I would like to know if there are any measurements that would help me place the badge correctly. From photos of other cars, I can see approximately where it should go, but I would like to get it as close to the right location as reasonably possible.

    I was not able to turn up any measurements with an archive search. Thanks in advance for any input.
     
  2. vrooom

    vrooom Formula Junior

    Jan 29, 2007
    457
    #2 vrooom, Feb 6, 2013
    my 73 gts has it 1 " down from the crease (top of emblem ) and 5" over from the door opening (top right corner of emblem ) the car was painted many years ago so i don't remember if there were holes in the body to position it or if it was stuck on "close enough " hope someone else can also measure for you. dan
     
  3. mkeith

    mkeith Rookie

    Mar 15, 2009
    46
    Houston, TX
    Full Name:
    Michael Keith
    #3 mkeith, Feb 7, 2013
    Thanks Dan. That tells me what I need to know. In other photos I've seen, that appears to be about where the badge is positioned. So I'm confident that yours is in the correct position, & having some actual measurements really helps.
     

Share This Page