News

Disney bound- can bring pulleys, valves, air plugs etc.

Discussion in '308/328' started by derekw, Oct 14, 2019.

  1. derekw

    derekw Formula 3

    Sep 7, 2010
    1,108
    London, UK
    Full Name:
    Derek W
    Hi all, I'm coming to feed the rat on Thursday so if anyone needs any of the parts I have left let me know as I can post from Florida:
    21-4N stainless valves $12.50 each,
    C954 aluminum bronze wrist pin bushes for most classic Ferraris $60/set of 8 (better than the bimetal originals)
    Long nose 6061 air injection plugs $75/set (only red left but diluted draino makes them silver :)
    viton liner o-rings $10/set of 8
    viton valve stem seals $1ea.
    New style adjustable 7075 HTD/GT2 round tooth cam pulleys (set of six) $630
    Old style adjustable 7075 (original square tooth, set of four) $350
    Vitaloni electric mirror mounting brackets 7075 $125 pair
    7075 brackets to fit Wilwood calipers for Porsche Boxter/cayman disks $120pair

    I'm probably forgetting something but all these parts are mentioned in my blog:
    https://www.ferrarichat.com/forum/threads/dereks-308-engine-rebuild.535247/
     
  2. mwr4440

    mwr4440 Four Time F1 World Champ
    Rossa Subscribed

    Jun 8, 2007
    41,418
    Bavaria, The 'Other' Germany
    Full Name:
    Mark W.R.
    Derek,

    I'll be very interested in the adjustable round tooth pullies if they also come with the special pins you created.
     
  3. derekw

    derekw Formula 3

    Sep 7, 2010
    1,108
    London, UK
    Full Name:
    Derek W
    Mark, just send £520 to my paypal and I'll send you some pulleys and pins. Let me know if you have the early lower drive (seal outside the bearings) or later with seal inside and greased/sealed bearings. The lower pulleys are slightly different.
     
  4. mwr4440

    mwr4440 Four Time F1 World Champ
    Rossa Subscribed

    Jun 8, 2007
    41,418
    Bavaria, The 'Other' Germany
    Full Name:
    Mark W.R.
    Derek,

    Sorry,

    I do not know which lower berings are which and if they are interchangeable.

    Can you show me a pic of each type of bearing and pully so I get it right?

    Mark
     
  5. derekw

    derekw Formula 3

    Sep 7, 2010
    1,108
    London, UK
    Full Name:
    Derek W
    The cutoff was in '78 I think so you have the external bearings 6203-2RS1C4. Earlier cars had the open bearing inside a seal so need a slightly different lower pulley (but the same part number :)
     
  6. sltillim

    sltillim Formula 3
    Silver Subscribed

    Nov 22, 2009
    1,237
    San Diego
    Full Name:
    Spencer Tillim
    sent you an email.
     
  7. mwr4440

    mwr4440 Four Time F1 World Champ
    Rossa Subscribed

    Jun 8, 2007
    41,418
    Bavaria, The 'Other' Germany
    Full Name:
    Mark W.R.
    My car is a 1981 North American, if that helps.

    What is your PP Address?
     
  8. sltillim

    sltillim Formula 3
    Silver Subscribed

    Nov 22, 2009
    1,237
    San Diego
    Full Name:
    Spencer Tillim
  9. wax

    wax Four Time F1 World Champ
    Advising Moderator

    Jul 20, 2003
    43,901
    SFPD
    Full Name:
    Dirty Harry
    ^Epic Opening Line^

    Sent from my SAMSUNG-SM-J727A using FerrariChat.com mobile app
     
  10. derekw

    derekw Formula 3

    Sep 7, 2010
    1,108
    London, UK
    Full Name:
    Derek W
    The rat seems greedier every few years when we come to pay homage, bow down, (and bend over!) The fun vs. wait+cost arithmetic don’t add up no more :-(
     
  11. TommyA

    TommyA Formula Junior
    Silver Subscribed

    Oct 7, 2002
    379
    Sharpsburg, GA.
    Full Name:
    Tommy A
    Derek.
    Do you have an additional 4 pins? I have a new set of gears but no pins.
    Thank you
     
  12. derekw

    derekw Formula 3

    Sep 7, 2010
    1,108
    London, UK
    Full Name:
    Derek W
    #12 derekw, Oct 26, 2019
    Last edited: Oct 26, 2019
    Look through the packaging. They are wrapped in tape.They were inside one lower pulley.
     
  13. mwr4440

    mwr4440 Four Time F1 World Champ
    Rossa Subscribed

    Jun 8, 2007
    41,418
    Bavaria, The 'Other' Germany
    Full Name:
    Mark W.R.
    Derek,

    Check PP.

    MARK
     
  14. derekw

    derekw Formula 3

    Sep 7, 2010
    1,108
    London, UK
    Full Name:
    Derek W
    I only have the adjustable pin sets. You can drill a 10mm hole and make any pulley adjustable. $40 for a set of four incl. post
     

Share This Page