Display button not working (2010 Ferrari California) | FerrariChat

Display button not working (2010 Ferrari California)

Discussion in 'Technical Q&A' started by rbellezza, Feb 6, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. rbellezza

    rbellezza F1 Rookie

    Jun 18, 2008
    2,792
    Henderson, NV
    Full Name:
    Roberto Bellezza
    #1 rbellezza, Feb 6, 2021
    Hello all, hope someone can help ..
    there are 4 buttons (Mode, Display and Up/Down) located on the left side of the steering wheel needed to navigate the TFT display on the 2010 California. The Display button is needed to access the menu but doesn't do anything. The Mode and the Up/Down buttons all work. I read the manual but i can't find anything that indicate there is a lock on the Display function. Do i have a bad Display button ? What am i missing ?
    Any info i really appreciate ...
     
  2. rbellezza

    rbellezza F1 Rookie

    Jun 18, 2008
    2,792
    Henderson, NV
    Full Name:
    Roberto Bellezza
    #2 rbellezza, Feb 6, 2021
    Forgot to mention ,,, i took the buttons down and tested right on the display switch, 9V goes down to 0 when the switch is pressed, just like the other 3 buttons. So, the switch is working and also there is connection with the IO board since i have 9V before pressing. I also unplugged the battery and reboot 30 minutes later. It didn't work.
     

Share This Page