355 - DIY Fix For Worn Seat Bolster | FerrariChat
Buy

355 DIY Fix For Worn Seat Bolster

Discussion in '348/355' started by Tangospell, May 6, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Tangospell

    Tangospell Rookie

    Nov 20, 2007
    42
    Brentwood, West L.A.
    #1 Tangospell, May 6, 2020
    Not quite Pebble Beach, but for less than $20 a way to make your worn driver's seat bolster look better (unless you're British in which case the more patina the better). Ordered touch-up kit on Amazon. Mixed color to match seats. Cleaned worn leather with rubbing alcohol and applied color with one of girlfriend's make-up sponges. Et voila!
    Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
     
  2. Ferrarium

    Ferrarium F1 Veteran
    Sponsor Rossa Subscribed

    Jul 28, 2018
    5,728
    Central NJ
    Full Name:
    Eric
    #2 Ferrarium, May 6, 2020
    looks better for sure, and better yet with more distance. Time will also wear that in some. Usually you sand the leather lightly with fine sand paper and be careful as alcohol can remove the original color where you don't want it removed for others. The main issue people have is it covers the stitching color, its a great way to detect painted seats when buying.
     
  3. taz355

    taz355 F1 Veteran
    Owner Silver Subscribed

    Feb 18, 2008
    6,007
    Indio Ca/ Alberta
    Full Name:
    Grant
    #3 taz355, May 6, 2020
    phrogs and JoeTSI like this.

Share This Page