Doh! Part found in bottom of door | FerrariChat
Buy

Doh! Part found in bottom of door

Discussion in '308/328' started by BwanaJoe, Dec 14, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. BwanaJoe

    BwanaJoe Formula 3

    Oct 23, 2006
    1,764
    Former Space Coast
    Full Name:
    Joe Burlein
    #1 BwanaJoe, Dec 14, 2007
    Last edited by a moderator: Sep 7, 2017
    This was in the bottom of the door well right by where the speaker sits. Looks like a spacer to me, but to what? I've found one spacer in the parts catalog (#40: 60441409) but that one is brass and much smaller. Anyone have a clue? (From the way the vapor barrier is tacked on with double sided tape and duct tape, someone has been in here before to work on the windows!)
    Image Unavailable, Please Login
     
  2. spiderseeker

    spiderseeker Formula 3

    Jul 22, 2005
    1,718
    Colorado
    Full Name:
    Steve
    #2 spiderseeker, Dec 14, 2007
    That isn't the window stop is it ? I know that at the bottom of the inner door area, when the window goes all of the way down , it hits on 2 rubber bumpers, not sure if that's it though.
    (Its been a while since I lubed my windows)
     
  3. barcheta

    barcheta F1 Rookie

    Nov 15, 2003
    3,738
    Maryland
    Full Name:
    Jim
    #3 barcheta, Dec 15, 2007
    it's a spacer for either one of your armrest screws/bolts or for the door panel itself.
     
  4. Jdubbya

    Jdubbya The $10 Trillion Man
    Silver Subscribed

    Dec 28, 2003
    44,036
    Hell's waiting room
    Full Name:
    John
    #4 Jdubbya, Dec 15, 2007
    How big is it and what's it made of. Could it be a spacer around the hole for the emergency window crank? Hard to tell without some sort of reference.
     
  5. BwanaJoe

    BwanaJoe Formula 3

    Oct 23, 2006
    1,764
    Former Space Coast
    Full Name:
    Joe Burlein
    #5 BwanaJoe, Dec 15, 2007
    Last edited by a moderator: Sep 7, 2017
    Not one of the window buffers. I don't think it is the spacer for the window crank, that one is still in place. Looks to be made of metal.
    Image Unavailable, Please Login
     
  6. DMaury

    DMaury Formula 3

    Mar 27, 2007
    1,993
    Ponchatoula, LA
    #6 DMaury, Dec 15, 2007
    I found the same spacers in my door when I disassembled it on my 328. I think they may be spacers for mounting the power lock actuators, as I know mine were bad and had been removed.
     
  7. BwanaJoe

    BwanaJoe Formula 3

    Oct 23, 2006
    1,764
    Former Space Coast
    Full Name:
    Joe Burlein
    #7 BwanaJoe, Dec 16, 2007
    Yes, this is the power lock actuator spacer (which does not have a part number in the book). The top one (the one you can't see without looking up into the door) was replaced by a nut of almost the same width. Thanks to everyone for the replies.

    Joe
     

Share This Page