don't do this.... | FerrariChat

don't do this....

Discussion in '308/328' started by drbill, Apr 16, 2005.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. drbill

    drbill Karting

    Nov 14, 2004
    65
    new york
    i was bolting on my 355 wheels for my 94 348 spyder and while jacking up the rear left side i heard a little puncture and gallons of anti freeze poured out. obviously, i f-cked up with the wrong jack point .car being towed monday am and we'll see-could it have been just a hose and not the radiator? first time ferrari owner screw up , what can i say.....
     
  2. BULL RUN

    BULL RUN Formula 3

    Dec 18, 2004
    1,684
    Sorry it's the radiator
     
  3. Kds

    Kds F1 World Champ

    Thanks for the tip.....I will never, ever, try to put 355 wheels on my 348.
     
  4. drbill

    drbill Karting

    Nov 14, 2004
    65
    new york
    what do you think cost of replacement will be?
     
  5. BULL RUN

    BULL RUN Formula 3

    Dec 18, 2004
    1,684
    Repair don't replace. If you can take it off yourslef just take it to a radiator shop. Safe yourself a thousand or so.
     
  6. ernie

    ernie Two Time F1 World Champ
    Lifetime Rossa Owner

    Nov 19, 2001
    22,614
    The Brickyard
    Full Name:
    The Bad Guy
    You can't repair it. The tanks on a 348 are made out of plastic. It sounds like he pushed one of the guide pins on the bottom into the radiator tank, causing it to crack. When I replaced mine I bought a used radiator for $250. The dealers are smoking crack for what they want for a new one.
     
  7. BULL RUN

    BULL RUN Formula 3

    Dec 18, 2004
    1,684
    How bout an epoxy patch, or plastic weld.

    If not, so much for conventinal radiator repair.
     

Share This Page