Door locks 1990 TR | FerrariChat
Buy

Door locks 1990 TR

Discussion in 'Boxers/TR/M' started by enoberoib, Nov 15, 2012.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. enoberoib

    enoberoib Rookie

    Mar 14, 2010
    26
    maryland
    Full Name:
    robert Congedo
    #1 enoberoib, Nov 15, 2012
    Besides the fuse is there any common reason that the door locks would fail? It used to lock the passenger side with the drivers side but no more.I was wondering if there is anything relatively easy to check without taking the door apart. I remember someone had a detailed instruction how to take the door apart but I don't remember when it was. Let me know .
    Thanks
     
  2. fast eddy

    fast eddy Formula Junior

    Apr 8, 2010
    282
    Utah
    Full Name:
    Ed Davenport
    #2 fast eddy, Nov 16, 2012
    I too have recently had this same occurance! Any help on this would be great!
     
  3. Red Head Seeker

    Red Head Seeker Formula 3
    BANNED

    Apr 27, 2009
    2,443
    San Francisco Area
    Full Name:
    Mark
    #3 Red Head Seeker, Nov 16, 2012
    Due to the infrequency of use, I would venture to estimate....corroded contacts.....Mark
     
  4. curtisc63

    curtisc63 Formula 3
    Owner

    Dec 13, 2005
    2,290
    Maryland
    Full Name:
    Curtis Campbell
    #4 curtisc63, Nov 16, 2012
    Hi Rob,

    I think the thread you are looking for is here in the technical section on power window motors. Lots of good pics and description.

    http://www.ferrarichat.com/forum/showthread.php?t=44288

    I tend to agree with Mark - likely a bad connection somewhere. Trace wires to the solenoid and clean up all connections.

    Curtis
     
  5. jrbaldwin

    jrbaldwin Karting
    Silver Subscribed

    Jul 3, 2011
    144
    Pacific North West
    Full Name:
    James Baldwin
    #5 jrbaldwin, Nov 16, 2012
    My door locks did not work properly and the PO installed a aftermarket actuator on the drivers side. While fixing the slow windows I remove aftermarket actuator, put the wiring back to stock and cleaned the connection in both doors and the doors lock starting working.

    Jim
     
  6. enoberoib

    enoberoib Rookie

    Mar 14, 2010
    26
    maryland
    Full Name:
    robert Congedo
    #6 enoberoib, Nov 17, 2012
    Thanks for the help I will check the contacts.
     

Share This Page