Door panel tr | FerrariChat

Door panel tr

Discussion in 'Boxers/TR/M' started by hugo judice, Sep 12, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. hugo judice

    hugo judice Rookie

    Joined:
    Jul 12, 2007
    Messages:
    34
    Full Name:
    hugo judice
    Good morning,

    i have a 85 tr, and i have to dismantle the door panel to change the run channel gaskets.

    Can you help me and tell me or show with fotos , how to proceed.

    Thanks

    ps sorry for my english .
     
    hugo judice, Sep 12, 2011
    #1
  2. vincenzo

    vincenzo F1 Rookie

    Joined:
    Nov 2, 2003
    Messages:
    3,373
    do a search on 'slow windows' in the TR section and you'll find some very good pics and procedures.
    rgds,
    Vince
     
    vincenzo, Sep 12, 2011
    #2
  3. testamon

    testamon Formula Junior

    Joined:
    Aug 16, 2008
    Messages:
    346
    Location:
    Sydney
    Full Name:
    Mike O
    Hi do a search for 'power window rebuild 'and it will lead to all the info you need. If you are going to use the 'original' Ferrari window bailey channel as supplied by Ferrari forget it. The channel they have is not suitable for the Tr's. the channel requires glueing and does not match the original profile. Some parts suppliers in Europe are trying to rectify the problem by supplying a generic flocked moulding however it also is not consistent with the original profile. I am not sure what is in place in the US. PM me if you have problems with the correct seal.
     
    testamon, Sep 12, 2011
    #3

Share This Page