Door seals | FerrariChat

Door seals

Discussion in '308/328' started by pedders, Dec 11, 2024.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. pedders

    pedders Karting

    Apr 25, 2010
    69
    Hi all

    I don’t suppose anyone has a picture of the door aperture on a 1979 (or similar) 308 GTB that shows what an original fitment door seal look like?

    Many thanks.
     
  2. Rifledriver

    Rifledriver Three Time F1 World Champ

    Apr 29, 2004
    37,090
    Cowboy Capitol of the World
    Full Name:
    Brian Crall
    #2 Rifledriver, Dec 11, 2024
    Last edited: Dec 11, 2024
    No but its pretty well known. All the serious Ferrari parts suppliers sell it by the foot. Its still made by one of the Italian weather strip companies.

    I dont really think it was specific to Ferrari. They just used an OTC product.

    This is a GTS but the rear half rubber is the same. Picture is high enough res you should be able to see it.
     

    Attached Files:

  3. pedders

    pedders Karting

    Apr 25, 2010
    69
    Thank you! I am hoping someone might have a picture of the top left corner of the door opening - where the seal follows a path that is effectively a right angle.

    I am trying to find out whether it’s a continuous length of seal there that is ‘bent’ at 90 degrees in the corner, or whether there is meant to be a break in seal where two ends meet.

    Hope this is making some sense!
     
  4. Rifledriver

    Rifledriver Three Time F1 World Champ

    Apr 29, 2004
    37,090
    Cowboy Capitol of the World
    Full Name:
    Brian Crall
    On GTB the seal is one piece with ends terminating in that corner. It should be a mitered corner.
     
  5. pedders

    pedders Karting

    Apr 25, 2010
    69
    Super helpful - thank you.
     

Share This Page