Door Stop Rebuild | FerrariChat

Door Stop Rebuild

Discussion in '365 GT4 2+2/400/412' started by SouthJersey400i, Jul 29, 2022.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. SouthJersey400i

    SouthJersey400i Formula 3

    Mar 14, 2007
    1,591
    Romulus, NY (Finger Lakes)
    Full Name:
    Ken Battle
    My driver's side door stop has been weak for several years. I bought a "good" used one and it was only slightly better then old one for a short time. I decided to rebuild mine with new rubber pieces, now that I had a spare to work with. I bought a rubber strip from McMaster Carr:
    Image Unavailable, Please Login
    You have to open the tabs on the holder; be careful as you have to bend them back. Actually when you reassemble it you can use the bolts that hold it on the door to clamp it together while bending tabs back. Okay, I broke one of the 4.
    The rubber needs to be cut to size.
    So far it is working well. :)
    Ken
     
    Schumi likes this.

Share This Page