Driver's door jamb sticker ... | FerrariChat
Buy

Driver's door jamb sticker ...

Discussion in 'California(Portofino)/Roma(Amalfi)' started by gircal, Nov 28, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. gircal

    gircal Karting

    Nov 13, 2009
    90
    South Florida
    Full Name:
    Dick G
    #1 gircal, Nov 28, 2011
    As we all realize, this factory sticker containing primarily the "build date" does not have a long life and decomposes rather quickly. Does any one have a solution? Can a new one be ordered from the dealer ... a new sticker, that is, not another California (which I suppose is the only temporary fix until that one goes bad too).
     
  2. tuttavelocita

    tuttavelocita Formula 3

    Aug 26, 2007
    1,453
    #2 tuttavelocita, Nov 28, 2011

    Before it starts to degrade cover it with clear bra material.
     
  3. 134282

    134282 Four Time F1 World Champ
    BANNED

    Aug 3, 2002
    40,647
    California
    Full Name:
    Carbon McCoy
    #3 134282, Nov 28, 2011
    How bad is it? Can you post a picture? Is it starting to bubble already? Once the film that covers it starts to bubble, it can begin separating from the actual data sticker, thus removing some of the information.
     
  4. GuyIncognito

    GuyIncognito Nine Time F1 World Champ
    Silver Subscribed

    Jun 30, 2007
    99,798
    #4 GuyIncognito, Nov 28, 2011
    he better give that data to you, for safe keeping ;)
     
  5. gircal

    gircal Karting

    Nov 13, 2009
    90
    South Florida
    Full Name:
    Dick G
    #5 gircal, Nov 29, 2011
    I now find that it is a 2 piece sticker ... a bottom decal (of a silver color with the printing) and a top clear plastic sticker (which is the one that downgrades by wrinkling). I believe I'll try removing the top sticker by applying a little heat and hope it separates without taking off any printing. If I'm successful, I'll then just cover the decal with "clear bra" film for protection.
     
  6. sg69

    sg69 Karting

    Aug 23, 2009
    193
    VA
    #6 sg69, Nov 29, 2011
    I removed mine without heat. I'm sure heat wouldn't hurt but not too much because the printed info might come up as well. All my info remained in tact. Just take your time and peel it of carefully and slowly.

    Now where can I get some clear bra material?
     
  7. gircal

    gircal Karting

    Nov 13, 2009
    90
    South Florida
    Full Name:
    Dick G
    #7 gircal, Nov 29, 2011
    Contact a local "Clear Film" shop and I'm sure they'll put on a scrap piece for a few dollars. if that. Auto Super Shield may have a location there or contact 3M.
     
  8. omniman

    omniman Formula Junior

    Aug 24, 2008
    343
    Florida/Michigan
    Full Name:
    James L.
    #8 omniman, Dec 1, 2011
    Last edited by a moderator: Sep 7, 2017
    Here are my stickers in their current condition. 2010 delivered in October 09. By the way, rest of the car is perfect... not a scratch on it.
    Image Unavailable, Please Login
     
  9. cheesey

    cheesey Formula 3

    Jun 23, 2011
    1,921
    #9 cheesey, Dec 1, 2011
    careful with the heat... sticker could be from thermal printer... too much heat and it all goes black
     
  10. Russ Birch

    Russ Birch Formula Junior

    Oct 31, 2003
    437
    Clearwater, FL
    Full Name:
    Russ Birch
    #10 Russ Birch, Dec 2, 2011
    I was under the impression that it was like a "best if used buy" sticker, like on food. When the sticker starts to go, I trade it in for a new one. Is that not right?
     
  11. RickLederman

    RickLederman F1 Rookie
    Rossa Subscribed

    Sep 18, 2007
    2,837
    Swanton Ohio
    Full Name:
    Rick Lederman
    #11 RickLederman, Dec 2, 2011
    Yep, that is why I traded up :D

    Rick
     

Share This Page