The Vitolini? mirror on my car has no resistance and keeps drooping. How do I fix/tighten it?
there is a screw in lower forward portion (toward door handle) of base--just tighten it and it will not droop
on my 85qv on the passenger side it has the same problem,it has a adjestment srcew in the front of the base plate,it needs a hex bit driver to tighten the screw,it holds for a while until someone slams the door close,good luck
If you have the rectangular mirrors like my car has you can remove the offending screw(s) - be careful that the mirror doesn't 'flop' down and ding the door when you remove the set screw - and put some Loctite on the threads. Put the screw back in and adjust then tighten and you're all set! Cheers; Aaron '82 GTSi
