Drooping pass side visor | FerrariChat
Buy

Drooping pass side visor

Discussion in '456/550/575' started by Bahaba0, May 17, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Bahaba0

    Bahaba0 Karting

    Feb 4, 2010
    125
    Miami, Fl
    Full Name:
    David Stone
    #1 Bahaba0, May 17, 2013
    Can anyone suggest a shop that provides a fix. Thx
     
  2. pma1010

    pma1010 F1 Rookie

    Jul 21, 2002
    2,559
    Chicago
    Full Name:
    Philip
    #2 pma1010, May 17, 2013
    As you know, dealer can get you a replacement.

    Carl (FBB) documented a fix. You'll find with search.
    Philp
     
  3. ferraridriver

    ferraridriver F1 Rookie

    Aug 8, 2002
    4,151
    Bay Area Calif.
    Full Name:
    Dave
    #3 ferraridriver, May 17, 2013
  4. wbklink

    wbklink F1 Rookie

    Sep 2, 2009
    3,420
    Los Angeles
    Full Name:
    Bill Karp
    #4 wbklink, May 17, 2013
    That's it done.

    cheers,

    Bill
     
  5. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    39,141
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    #5 tazandjan, May 17, 2013
    Last edited by a moderator: Sep 7, 2017
  6. drake123

    drake123 Karting
    Silver Subscribed

    Jan 22, 2012
    181
    Pa
    Full Name:
    Drake
    #6 drake123, May 18, 2013
    Mine has been fine since Dave fixed it. Highly recommend.

    Drake
     
  7. Eli355

    Eli355 Formula Junior

    Oct 12, 2010
    678
    Long Island, NY
    Full Name:
    Eli
    #7 Eli355, May 18, 2013
    How do I find Dave to help me repair mine? The referenced tread is a couple of years old.
     
  8. Konadog06

    Konadog06 Formula Junior

    Aug 22, 2007
    963
    Daytona Beach, Florida
    Full Name:
    Bill
    #8 Konadog06, May 18, 2013
    PM ferraridriver, post number 3 above.

    Bill
    FL
     
  9. ferraridriver

    ferraridriver F1 Rookie

    Aug 8, 2002
    4,151
    Bay Area Calif.
    Full Name:
    Dave
    #9 ferraridriver, May 18, 2013
    Hi All,

    If nobody has messed around with it before I can probably repair it. I remove the broken plastic sleeve and replace it with an aluminum piece bonded with Loctite 620. I've used Loctite 620 to repair a golf club when the head came off so I know it's strong enough. Usually I can get the broken plastic piece out without cutting the stitching. It all depends on where it broke. I've done about a dozen so far with 100% success.

    Turnaround is usually 1-2 days. The cost is $100. PM me for shipping information.

    Dave
     

Share This Page