Dumb 355 top fluid question | FerrariChat
Buy

Dumb 355 top fluid question

Discussion in '348/355' started by spider348, Apr 24, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. spider348

    spider348 Formula 3

    Nov 3, 2003
    1,273
    MA
    Full Name:
    John
    #1 spider348, Apr 24, 2009
    Sorry for the stupid question but I am trying to eliminate all variables. My workshop manual instructs to check the hydraulic fluid level with the top "closed". I assume that means top up position. Is that correct? As always, thanks!
     
  2. f355spider

    f355spider F1 World Champ
    Owner Rossa Subscribed

    May 29, 2001
    18,055
    USA
    #2 f355spider, Apr 25, 2009
    Yes.
     
  3. spider348

    spider348 Formula 3

    Nov 3, 2003
    1,273
    MA
    Full Name:
    John
    #3 spider348, Apr 25, 2009
    Thanks. Top hangs up only when closing, 1/2 way through the cycle. A little help moving the front top assembly forward allows it to close. Suspect a secondary cylinder. Perhaps I will bleed the cylinders next. Thanks again.
     
  4. James-NZ

    James-NZ F1 Veteran

    Jun 26, 2007
    5,822
    Hamilton, NewZealand
    Full Name:
    James
    #4 James-NZ, Apr 26, 2009
    Check to make sure one or more of the arms is not binding, one may be slightly out of alignment.
     
  5. spider348

    spider348 Formula 3

    Nov 3, 2003
    1,273
    MA
    Full Name:
    John
    #5 spider348, Apr 26, 2009
    Thank you. Good suggestion. There is also a distinct sound when the top releases(Left/ Driver's side only). It does appear something is binding. Sitting in the car viewing several opening and closing cycles, I cannot see the point where it is restricted.
     

Share This Page