Electronic ignition control box mounting

Just sharing a quick tip for people looking for places to mount ignition control boxes. Mine were originally upside down under the battery tray. This is a terrible location. Battery acid had leaked onto the tray and into the control boxes. Mounting them on the wheel well is unsightly for originality. I also didn't want to drill extra holes in sheet metal or the fiberglass firewall so I came up with a mount plate to place them between the battery and firewall. It mounts through the factory holes for the battery tray. Seemed to be the best solution I could find if anyone was running into the same problem. I do have 2 spare mounting plates that are laser cut to exact dimensions if anyone needs one. One is 1/8" 5052 aluminum and the other is .030" 304 Stainless. The stainless was designed to have a 10mm foam pad under it for vibration dampening.

View attachment 3703666
View attachment 3703667
View attachment 3703668
View attachment 3703669