Hello All I'm having a problem with my emergency flashers, I'm blowing a fuse. I believe I have limited it down to the relay. Put the flasher switch in the hazard position ( to break the circuit on the turn signals) I have removed the emg flasher wires (grey) from the switch. I have removed all the wires from the relay except the grey feed wire (from the switch). I jumped the 2 grey wires from the switch and didn't blow the fuse I added only the black ground wire to the relay and then blew the fuse. Safe to say the relay is going to ground? The Owners manual calls out a "SIPEA LE/C 4900" is there a comparable switch out there? Thanks Steve
https://www.midwest-bayless.com/CSearch.aspx?Search=Sipea%20&CategoryID=0&ManufacturerID=0&SectionID=0&PriceRange=0&SortBy=1&PageSize=12&AndOr=AND&DisplayMode=Grid&Condition=-1&SearchPartNumbersOnly=0