Emissions Check Valve, Please Help | FerrariChat
Buy

Emissions Check Valve, Please Help

Discussion in '308/328' started by Adeotec, Nov 23, 2006.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Adeotec

    Adeotec Karting

    May 11, 2004
    124
    Philadelphia PA
    #1 Adeotec, Nov 23, 2006
    I need an emissions check valve for my 1988 328. Does anyone know if this is a Ferrari specific part or a part I could get from NAPA, GM, ect. Has anyone had to replace one of these before? What was your experience? Thank you.
     
  2. ProCoach

    ProCoach F1 Veteran
    Owner

    Sep 15, 2004
    5,465
    VIR Raceway
    Full Name:
    Peter Krause
    #2 ProCoach, Nov 24, 2006
    It is a GM-equivalent item. They are available at NAPA or most auto parts stores for between $25-$30. I'm not at the shop but will post the part number as soon as I get back. I cut the old female threaded section off the injection manifold as the stamped steel section is usually so badly corroded, you can't get it off the usual way. The generic number is something like AM-7 or AN-7.

    -Peter
     
  3. carlrose

    carlrose Formula Junior

    Nov 25, 2003
    324
    #3 carlrose, Nov 25, 2006
    Hi Adam,

    Drop me a PM or email at [email protected]. I have complete pictorial of how to replace on a 328.

    Best,

    Carl
     
  4. Adeotec

    Adeotec Karting

    May 11, 2004
    124
    Philadelphia PA
    #4 Adeotec, Nov 26, 2006
    Thank you for the replies. Carl, you have a PM.
     

Share This Page