Engine Ground Location for GCK... | FerrariChat

Engine Ground Location for GCK...

Discussion in '348/355' started by huzilulu, Nov 5, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. huzilulu

    huzilulu Formula Junior

    Joined:
    Apr 20, 2011
    Messages:
    340
    Location:
    Houston
    Full Name:
    Huzi Husain
    Hey Guys

    Finishing up the install of the GCK... only thing left is the 4 engine ground washers... then clean up, put stuff back... connect the battery and fire it up!! woohoo!!

    Question - where are the engine ground locations on the back of the 1-4 head? A quick pic from anyone would help...

    Thanks
    Image Unavailable, Please Login
     
    Last edited by a moderator: Sep 7, 2017
  2. f355spider

    f355spider F1 World Champ Owner Rossa Subscribed

    Joined:
    May 29, 2001
    Messages:
    18,055
    Location:
    USA
    The engine ground is located on the back side of the right cylinder head. Near the top, not far from the throttle position potentiometer location. You will find a stud, with a wire with a crimped on ring mount...this is held to the stud with a nut and washer.

    What I would recommend, is cut the old ring mount off. Crimp a new one on, after cleaning and brushing the copper wire, just like you did with the other connections you renewed. I also used a small piece of heat shrink tubing to seal the back side of the crimp, then a small dab of silicone sealant on the front side of the crimp...again just to seal out dirt and moisture. Then attach it to the stud....all done.
     

Share This Page