Engine mounts | FerrariChat

Engine mounts

Discussion in '348/355' started by hameednoor, Oct 10, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. hameednoor

    hameednoor Rookie

    Jun 4, 2010
    21
    355 vibrates and the mechanic says it is time to change all the engine mounts. He says it is a six hour job. I would assume much less. Any advice.

    Cheers
     
  2. hameednoor

    hameednoor Rookie

    Jun 4, 2010
    21
    Are there any alternative mounts or do we have to stick to the original. As the mounts must be madevby somebody else is there another car brands mount that would fit on a 355.
     
  3. f355spider

    f355spider F1 World Champ
    Owner Rossa Subscribed

    May 29, 2001
    18,044
    USA
    Oem is the only way (I am aware) to go. There are two engine mounts and two transaxle mounts. Common wear item. I believe they run about $550 for all four, and it is about a two hour job.

    Hell I did them on my BMW 540 (two engine, two trans mounts) in 40 minutes with the help of a buddy and his lift.

    If you are reasonably handy, I would consider doing it yourself.
     
  4. BLAMPEE

    BLAMPEE Man Card Status: Never Issued

    I just got all four replaced for around $1k parts+labor
     

Share This Page