Engine out | FerrariChat

Engine out

Discussion in 'Technical Q&A' started by yakxx21, Jun 30, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. yakxx21

    yakxx21 Karting

    Jun 29, 2013
    230
    Can somebody advise if the Dino 246 engine should / can be taken out from the top or bottom...and if the former what ancilliaries have to be removed first...
    Some years ago my local garage removed it from underneath but now it needs some more work and I will do myself.....and I see pics of it coming out the TOP ....
    so ..advise and comments very gratefully rcvd

    Thanks
     
  2. HeavyR

    HeavyR Karting

    Jan 31, 2012
    50
    Devon
    Full Name:
    harvey jones
    Only comes out the top . Remove engine cover , luggage compartment lid , rear firewall, rear exhaust manifold , bell housing and all other obvious ancillaries, winch engine on angle with crankshaft pulley end higher than bell housing end by about 4 to 6 inches and it will come out easy . Good luck ;-)
     

Share This Page