Enzo Tire Sensor Caliabration | FerrariChat
Buy

Enzo Tire Sensor Caliabration

Discussion in '288GTO/F40/F50/Enzo/LaFerrari/F80' started by SpeedyJunior, May 18, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. SpeedyJunior

    SpeedyJunior Karting

    Nov 29, 2005
    116
    Winter Park,Fl
    #1 SpeedyJunior, May 18, 2011
    To the Enzo guys out there , have you had a problem with your tires not reading in the re-set mode or will not caliabrate ???? Would like to hear some input ....

    Thank You
     
  2. AEHaas

    AEHaas Formula 3

    May 9, 2003
    1,465
    Osprey, Florida
    Full Name:
    Ali E. Haas
    #2 AEHaas, May 21, 2011
    You probably need new valve stems as they contain the battery for the transducer-transmitter. They last anywhere from 5 to 8 years but can go sooner or later.

    aehaas
     
  3. SpeedyJunior

    SpeedyJunior Karting

    Nov 29, 2005
    116
    Winter Park,Fl
    #3 SpeedyJunior, May 22, 2011
    Ali, we have replaced the tires and new sensors from the 396 series to the 450 series , I think we have a bad sensor from new or one of the ecu's might be going bad ... I'll chek the valve stems though , I'm pretty sure they were replaced when we did the tires ....

    Thank You for the input .....
     

Share This Page