Eprom chip copier for Motronic and work app | FerrariChat
Buy

Eprom chip copier for Motronic and work app

Discussion in 'Technical Q&A' started by luckydynes, May 28, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. luckydynes

    luckydynes F1 Rookie

    Jan 25, 2004
    3,931
    CA and OR
    Full Name:
    pit bull
    #1 luckydynes, May 28, 2008
    Hey all,

    I need to copy the following eproms but hope to kill 2 birds with one stone and get the unit that copies/allows editing of Motronic chips.

    manufacturer "ST"

    M27C4001 . .. they have 32 pins.

    Thanks,

    Sean
     
  2. ckracing

    ckracing Formula Junior

    May 20, 2006
    728
    Jacksonville,Florida
    Full Name:
    Charles
    #2 ckracing, May 28, 2008
    sent you a PM
     
  3. luckydynes

    luckydynes F1 Rookie

    Jan 25, 2004
    3,931
    CA and OR
    Full Name:
    pit bull
    #3 luckydynes, May 28, 2008
    thanks for the info
     
  4. luckydynes

    luckydynes F1 Rookie

    Jan 25, 2004
    3,931
    CA and OR
    Full Name:
    pit bull
    #4 luckydynes, May 28, 2008
    Needhams was reccomended by a couple follks but looks like they're not in biz.

    I also checked ebay but didn't see a copier for the 27 series chips and no obvious contacts . .. appreciate the guidance if I'm spastic :).

    I can do google but seems like the selection and price range is huge . .. don't want to spend $300 if $50 item will work just for the copying.

    As fellow fchatter pm'd me, I'll need a seperate device for altering Motronic chips so just need the copier for these eproms.

    Thanks for any other feedback, PM's.

    Sean
     
  5. fatbillybob

    fatbillybob Two Time F1 World Champ
    Consultant Owner

    Aug 10, 2002
    29,176
    socal
    #5 fatbillybob, May 28, 2008
    Contact NoDoubt he has been there done that. It is really easy and cheap.
     
  6. luckydynes

    luckydynes F1 Rookie

    Jan 25, 2004
    3,931
    CA and OR
    Full Name:
    pit bull
    #6 luckydynes, May 29, 2008
    thanks I'll pm him
     
  7. luckydynes

    luckydynes F1 Rookie

    Jan 25, 2004
    3,931
    CA and OR
    Full Name:
    pit bull
    #7 luckydynes, May 29, 2008
    looks like Moates.net is an automotive related soure that ND used but not sure their product will do my chips.
     
  8. luckydynes

    luckydynes F1 Rookie

    Jan 25, 2004
    3,931
    CA and OR
    Full Name:
    pit bull
    #8 luckydynes, May 29, 2008
    a Batronix scanner was also utilized . . .not sure if this copies also though . . reading on
     
  9. luckydynes

    luckydynes F1 Rookie

    Jan 25, 2004
    3,931
    CA and OR
    Full Name:
    pit bull
    #9 luckydynes, May 29, 2008
    Last edited: May 29, 2008
    http://www.progshop.com/shop/programmer/usb-chip-programmer/index.html

    hmmm . .. looks like this device will copy the chips I need and allow the editing of the 2.7 chips if I go that route. They also have extra eproms which I need . . convenient.

    $150 .. .. any comments? Seems like the way to go.

    cheers,

    Sean

    edit: it's from Batronix also . .. like using what others have had good experiences with :)
     
  10. luckydynes

    luckydynes F1 Rookie

    Jan 25, 2004
    3,931
    CA and OR
    Full Name:
    pit bull
    #10 luckydynes, May 29, 2008
    okay my one comment is they're in Germany . .. be nice if someone distributed something like this in the US so I don't have to pay $60 shipping.
     
  11. luckydynes

    luckydynes F1 Rookie

    Jan 25, 2004
    3,931
    CA and OR
    Full Name:
    pit bull
    #11 luckydynes, May 29, 2008
  12. luckydynes

    luckydynes F1 Rookie

    Jan 25, 2004
    3,931
    CA and OR
    Full Name:
    pit bull
    #12 luckydynes, May 29, 2008
    ordered what I need hopefully except for the ability to erase .. . because I'm getting new chips I don't need it right away but I'm sure the programmer will show up before the chips and have some old chips kicking around . . . can I just use a UV bulb from home depot or something to erase old chips? google probably has answers buried but thought someone could give quick answer.
     
  13. duskybird

    duskybird F1 World Champ
    Owner Rossa Subscribed

    Jan 20, 2007
    12,661
    29 Electoral Votes
    Full Name:
    Bill B.
    #13 duskybird, May 29, 2008
    I may have just the thing for you. I have an old uv sterilizer from a small marine tank. I've used a similar set up for erasing chips. If you need it let me know..... it is yours for the asking (as long as you keep me up to date on what you are doing) :D
     
  14. jm3

    jm3 F1 Rookie

    Oct 3, 2002
    4,364
    United States
    Full Name:
    JM3
    #14 jm3, May 29, 2008
    I just put my uv erase chips on the windowsill for a day.

    How many do you need?


    JM
     
  15. luckydynes

    luckydynes F1 Rookie

    Jan 25, 2004
    3,931
    CA and OR
    Full Name:
    pit bull
    #15 luckydynes, May 29, 2008
    hee hee good to know . ..

    thanks
     
  16. Brian Harper

    Brian Harper F1 Rookie
    Owner Silver Subscribed

    Feb 17, 2006
    4,078
    San Jose area
    Full Name:
    Brian Harper
    #16 Brian Harper, May 29, 2008
    I've left them on the dashboard of my truck for a few days, that did the trick. UV is free, the only thing the erasers buy is speed. Not worth it for most home users.
     

Share This Page