News

Euro 308qv aftermarket sway bars

Discussion in 'Technical Q&A' started by TURBOQV, Dec 24, 2003.

  1. TURBOQV

    TURBOQV Formula Junior

    Mar 6, 2003
    838
    NV and Socal
    Does anyone know where to get aftermarket sway bars and bushings?

    I just noticed my rear left endlink was snapped off. Looks like it was corroded. The other one is just about ready to go to. very strange?

    I would rather put new bars on front and rear than just replace one endlink.

    Thank you and Happy Holidays

    Paul
     
  2. To remove this ad click here.

  3. sp308qv

    sp308qv Karting

    Nov 20, 2003
    101
    South Jersey
    Full Name:
    Steve Ponzetto
    there are some sway bars on ebay, not sure how good they are but i posted a request for some feedback on them with no replies so judge for youself,i believe the guys name is excelisor,he also has aluminum radiators for 308
     
  4. Jay GT4

    Jay GT4 F1 Rookie

    Oct 16, 2001
    4,995
    La mamma dei fessi
    Full Name:
    e sempre incinta
    Rock's Auto restoration here in Toronto makes custom sway bars both front and rear for the 308's. Don't know the price but I know their work, they put together my engine and tranny. 1-416-686-8700 ask for Rocco. Or you could buy a used sway bar from Trutlands.
     
  5. mk e

    mk e F1 World Champ

    Oct 31, 2003
    11,968
    The twilight zone
    Full Name:
    The Butcher
    I think Nick has them. I think Norwood too. Also, Butch at Italian Design.
     
  6. 348 Turbo

    348 Turbo Formula 3

    Jul 17, 2002
    1,837
    Actually, you're in luck. My neighbor has a set. I've seen them. He has the sway bars, energy suspension bushings, and aftermarket shocks; all for the QV. He's decided he's not going to install them. If you want them, e-mail me. I'll pass on his #.
    Jeff
     
  7. To remove this ad click here.

  8. pma1010

    pma1010 F1 Rookie

    Jul 21, 2002
    2,559
    Chicago
    Full Name:
    Philip
    Saner Performance Fabrication made up an adjustable ARB for the rear of my 308. They are currently manufacturing a front. Comes with endlinks, whatever spacers are needed etc. They advertise in GRM and are also on the web.
    HTH
     

Share This Page