Euro exhaust bung cap thread size | FerrariChat

Euro exhaust bung cap thread size

Discussion in '308/328' started by MaranelloMark, Jul 19, 2024.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. MaranelloMark

    MaranelloMark Formula Junior
    Rossa Subscribed

    Nov 24, 2019
    439
    Bay Area, CA
    Hi All,

    '77 308 GTB 21819 with Euro headers, Tubi exhaust and no emissions equipment.

    The headers have a bung on each pipe and are capped with a bolt and a washer. Looks like I'm missing one. Either I missed it and it's always been missing (I doubt it) or it worked itself loose (also hard to believe). But either way, My #2 pipe is missing the cap-bolt and washer.

    Looking at Ricambi it seems like this is the p/n, but it is not stocked. P/N: 103748 CAP

    Anyone know if this is the correct p/n and what the thread size is? Wondering if this is something I can find locally.

    Sorry for no photo. I thought I snapped a photo last night, but I guess not. I'll post a photo when I get home this afternoon.

    Thanks!
    Mark
     
  2. Rifledriver

    Rifledriver Three Time F1 World Champ

    Apr 29, 2004
    37,106
    Cowboy Capitol of the World
    Full Name:
    Brian Crall
    The part you cite is a plug on the exhaust analyzer tube for US cars only and is dramatically smaller.

    Leave looking up parts to the parts guys. You will get the right part far more often.


    What you probably need is a 110860. Pretty sure its a 10 x 1.25 and they are stainless. Any Ferrari shop should have some laying around.
     
  3. MaranelloMark

    MaranelloMark Formula Junior
    Rossa Subscribed

    Nov 24, 2019
    439
    Bay Area, CA
  4. MaranelloMark

    MaranelloMark Formula Junior
    Rossa Subscribed

    Nov 24, 2019
    439
    Bay Area, CA
    Here is a photo since I said I would upload. And I had the wrong cyl. Not that it matters.

    Image Unavailable, Please Login


    Sent from my iPhone using FerrariChat
     
  5. MaranelloMark

    MaranelloMark Formula Junior
    Rossa Subscribed

    Nov 24, 2019
    439
    Bay Area, CA
    Sheesh. I still don’t know how I missed that. I’m just shaking my head. I can’t see the 5-8 until I lift it. The other three are tight. ‍


    Sent from my iPhone using FerrariChat
     
  6. MaranelloMark

    MaranelloMark Formula Junior
    Rossa Subscribed

    Nov 24, 2019
    439
    Bay Area, CA
    Looks like the ones that are in there were Frankenstein’d. They are standard bolts that were cut down to just a few threads. All oxidized badly also. I broke another one loose with little effort and it came completely out with maybe [emoji637]/[emoji638] turn.

    I’ll be ordering a whole set with washers now.

    @Rifledriver - Thanks.


    Sent from my iPhone using FerrariChat
     
  7. mixedgas

    mixedgas Formula Junior
    Silver Subscribed

    Apr 23, 2019
    267
    Ramona, CA
    Full Name:
    Mike
    On my QV these plugs have a locking tab ro keep them from getting loose. Not sure if these also apply to your car, but worth checking. Picture from superformance.

    Image Unavailable, Please Login
     
    MaranelloMark likes this.
  8. MaranelloMark

    MaranelloMark Formula Junior
    Rossa Subscribed

    Nov 24, 2019
    439
    Bay Area, CA
    I believe they do. I ordered them and the copper washers as well. My car is missing those tabs and copper washers. Thanks for the photo. I ordered from Ricambi and their photo wasn’t shown.


    Sent from my iPhone using FerrariChat
     

Share This Page