Euro Front Side Repeaters | FerrariChat

Euro Front Side Repeaters

Discussion in '206/246' started by racerboy9, Nov 19, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. racerboy9

    racerboy9 F1 Rookie Silver Subscribed

    Joined:
    Nov 3, 2003
    Messages:
    2,654
    Is there supposed to be a rubber gasket behind the chrome bezel on the euro front side repeaters? I have NOS repeaters still in the Ferrari bubble pack with a rubber ring between the lens and the bezel but I think they may have packaged them that way so as not to lose the rubber part. I have some I pulled off a wrecked euro GT years ago that have a square cut ring behind the bezel.
     
    racerboy9, Nov 19, 2013
    #1
  2. Nuvolari

    Nuvolari F1 Veteran Owner Silver Subscribed

    Joined:
    Sep 3, 2002
    Messages:
    6,642
    Location:
    Toronto / SoCal
    Full Name:
    Rob C.
    The rubber ring is absolutely correct
     
    Nuvolari, Nov 19, 2013
    #2
  3. racerboy9

    racerboy9 F1 Rookie Silver Subscribed

    Joined:
    Nov 3, 2003
    Messages:
    2,654
    Now that I have tried to install the repeaters tonight I find there is no room for the rubber ring. There is only enough clearance between the chrome bezel and the plastic compression fitting for the sheet metal. With the rubber ring you can't push the repeater in far enough to snap into place.
     
    racerboy9, Nov 19, 2013
    #3

Share This Page