Evaporator housing sealant | FerrariChat

Evaporator housing sealant

Discussion in '308/328' started by mixedgas, Nov 13, 2024.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. mixedgas

    mixedgas Formula Junior
    Silver Subscribed

    Apr 23, 2019
    267
    Ramona, CA
    Full Name:
    Mike
    Hi there, I have my evaporator out for testing/cleaning and wanted to ask what folks use to replace the 'glue' that seals the casing together? I'm tempted to use black RTV but it seems overkill. Thanks for any thoughts!
    Image Unavailable, Please Login
     
  2. Imatk

    Imatk Formula Junior

    May 6, 2007
    768
    Black RTV... not overkill.

    The reason you do that is water is going to condense in there and if it's not sealed you're going to have a leaky box right by your fuse panel... BAD combo.
     
    2dinos, mixedgas and Rifledriver like this.
  3. Rifledriver

    Rifledriver Three Time F1 World Champ

    Apr 29, 2004
    37,090
    Cowboy Capitol of the World
    Full Name:
    Brian Crall
    RTV is not overkill. As I recall its what was used by the manufacturer.
     
    2dinos and mixedgas like this.
  4. mixedgas

    mixedgas Formula Junior
    Silver Subscribed

    Apr 23, 2019
    267
    Ramona, CA
    Full Name:
    Mike
  5. Ferraridoc

    Ferraridoc F1 World Champ
    Owner Silver Subscribed

    Jun 20, 2012
    17,218
    Gold Coast, Aust.
    Full Name:
    Patrick
    Or worse, your foot!
     
  6. Imatk

    Imatk Formula Junior

    May 6, 2007
    768
    mixedgas likes this.
  7. Sergio Tavares

    Sergio Tavares Formula 3

    Nov 15, 2018
    1,308
    Full Name:
    Sergio Tavares

Share This Page