Exhaust too loud! | FerrariChat

Exhaust too loud!

Discussion in 'Technical Q&A' started by Thomas Ruland, Oct 2, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Thomas Ruland

    Thomas Ruland Karting
    Silver Subscribed

    May 12, 2018
    52
    Full Name:
    Thomas Ruland
    #1 Thomas Ruland, Oct 2, 2018
    I have a 2006 430 with Novitec Exhaust System in great condition but I prefer a quiet exhaust. Is their a replacement can or muffler that is quieter or must I change the entire system from the headers back?
    Thank You for any input. Tom Ruland 321 453 5639 321 432 8369
     
  2. Ferrari Tech

    Ferrari Tech Formula 3

    Mar 5, 2010
    1,126
    Georgia
    Full Name:
    Wade Williams
    #2 Ferrari Tech, Oct 2, 2018
    There are a number of options. Changing the muffler alone will help make it quiet. No need changing everything. Tubi is expensive but they sound great and are not too loud. Do some searching and find one you like.
     
  3. Thomas Ruland

    Thomas Ruland Karting
    Silver Subscribed

    May 12, 2018
    52
    Full Name:
    Thomas Ruland
    #3 Thomas Ruland, Oct 2, 2018
    Do you have a recommendation of which muffler and a source?
     
  4. greyboxer

    greyboxer F1 World Champ

    Dec 8, 2004
    12,313
    South East
    Full Name:
    Jimmie
    #4 greyboxer, Oct 2, 2018
    There's always the factory original - might even get a good deal swopping for your Novitec depending on where you are located

    As noted above there are many alternate exhaust threads in the 430 section
     
  5. Thomas Ruland

    Thomas Ruland Karting
    Silver Subscribed

    May 12, 2018
    52
    Full Name:
    Thomas Ruland
    #5 Thomas Ruland, Oct 2, 2018
    Are you saying that a factory muff will bolt directly to the Novitec pipes?
     
  6. tbakowsky

    tbakowsky F1 World Champ
    Consultant Professional Ferrari Technician

    Sep 18, 2002
    19,387
    The Cold North
    Full Name:
    Tom
    #6 tbakowsky, Oct 2, 2018
    Yes it should.
     
  7. Thomas Ruland

    Thomas Ruland Karting
    Silver Subscribed

    May 12, 2018
    52
    Full Name:
    Thomas Ruland
    #7 Thomas Ruland, Oct 3, 2018
    It does appear to have the correct number of holes and location on the flanges, but is the width of the flange on the Novitec and factory muff the same? It would be nice to hear from someone that has replaced the Novitec muff with a factory muff.
     

Share This Page