F1 pump motor screws | FerrariChat

F1 pump motor screws

Discussion in '360/430' started by HJZ360, Feb 13, 2022.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. HJZ360

    HJZ360 Karting

    Nov 27, 2017
    68
    Weslaco, Texas
    Full Name:
    Harold John Zurlo
    360 F1 pump motor failed, what dimension screws hold motor to motor? I have to remove heads of both because they are frozen. I have also changed relay, pump resistance changes from almost open to 6.5 Ohms. Thanks!
     
  2. 24000rpm

    24000rpm F1 Rookie

    not understanding your question, what screw?
     
  3. HJZ360

    HJZ360 Karting

    Nov 27, 2017
    68
    Weslaco, Texas
    Full Name:
    Harold John Zurlo
    Sorry, motor to pump. There are 4 - two hold pump case together, the other two hold motor to pump.
     
  4. 24000rpm

    24000rpm F1 Rookie

    ok? those 4 screws. What about them?


     
  5. HJZ360

    HJZ360 Karting

    Nov 27, 2017
    68
    Weslaco, Texas
    Full Name:
    Harold John Zurlo
    The metric thread size and length
     
  6. 24000rpm

    24000rpm F1 Rookie

    you want to know the thread size and length of the 4 screws?

    Is that what you need? I can measure it for u

     
  7. HJZ360

    HJZ360 Karting

    Nov 27, 2017
    68
    Weslaco, Texas
    Full Name:
    Harold John Zurlo
    Thanks, I removed the screw heads, matched at hardware store this afternoon.
     
  8. flash32

    flash32 F1 Veteran

    Aug 22, 2008
    6,917
    Central NJ
    Full Name:
    Dominick
    For people searching in the future ..can you list Size and type etc

    That will help the community

    TIA

    Sent from my moto g power using Tapatalk
     

Share This Page