430 - F1 wont start in 1:st starts in 2:n | FerrariChat

430 F1 wont start in 1:st starts in 2:n

Discussion in '360/430' started by johan6504, Jun 6, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. johan6504

    johan6504 Formula 3

    Jun 28, 2005
    1,168
    Sweden
    Full Name:
    Johan
    My friend have a 430 Scuderia and are having problem with the F1 shifting.
    The car wont start in 1:st but after some "thinking" it goes into 2:nd and drives fine. After starting in 2:nd he can go back to 1:st. Have anyone ever heard of similar problem?
     
  2. Skidkid

    Skidkid F1 Veteran
    Owner Rossa Subscribed

    Aug 25, 2005
    9,531
    Campbell, CA
    Full Name:
    John Zornes
    By start, are we to assume you are referring to movement? Tell us more about the clutch engagement, or attempted engagement, when in 1st. Does it try to engage? Does the engine bog? Do the wheels slip/spin at all? What is the PIS? How did it start? If you want help you need to provide more specific and detailed information.
     
  3. johan6504

    johan6504 Formula 3

    Jun 28, 2005
    1,168
    Sweden
    Full Name:
    Johan
    It is not my car just try to see if anyone has encountered similar problem before.
    The problem is described as: From cold starting the car and pulling the shifter to engage 1:st. The car does nothing and after "thinking" goes into 2:nd. Drives as normal no slippage or unusual behavior except wont start in first. After starting in 2:nd no problem going down to 1:st.
    No error codes from TCU. Hydraulic pressure OK, pump runs OK, relays changed. Currently looking into faults in actuator.
     

Share This Page