F129 Engine Dimensions | FerrariChat
Buy

F129 Engine Dimensions

Discussion in '348/355' started by Sharkbiteattack, May 11, 2016.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Sharkbiteattack

    Sharkbiteattack Rookie

    May 10, 2016
    5
    #1 Sharkbiteattack, May 11, 2016
    Looking for information regarding the physical dimensions of a F129B from a 355. I think?? the F131 from the 360 uses the same block and cylinder heads too with a taller induction setup, so that may work too.
     
  2. Dave rocks

    Dave rocks F1 World Champ
    BANNED

    Nov 23, 2012
    16,047
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    #2 Dave rocks, May 11, 2016
    You might want to be a bit more specific in what dimensions you are looking for? I have a motor out now and could measure some items if you need but I'm not going to create an entire part print of the engine :)
     
  3. Mitch Alsup

    Mitch Alsup F1 Veteran

    Nov 4, 2003
    9,734
    #3 Mitch Alsup, May 11, 2016
    In any event, all of the motor operating critical dimensions are in the WSM.
    But none of the dimensions needed to mount an engine in an engine bay are.
     
  4. Sharkbiteattack

    Sharkbiteattack Rookie

    May 10, 2016
    5
    #4 Sharkbiteattack, May 12, 2016
    I was mainly just looking for the basic dimensions L x W x H. Doeant have to be presise either so a tape meaure will work. So bottom of oil pan to top of intake plenum. Widest point of the engine from valve cover to valve cover. And then the length with the accessories attached. Crank centerline to bottom of the oil pan would be useful too. Thx in advance
     
  5. 97spiderman

    97spiderman Karting

    Dec 15, 2008
    107
    Sunny Buffalo, NY
    Full Name:
    JohnAG
    #5 97spiderman, May 13, 2016
    What are you trying to stuff it into?

    5 valves/cylinder and all
     
  6. Dave rocks

    Dave rocks F1 World Champ
    BANNED

    Nov 23, 2012
    16,047
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    #6 Dave rocks, May 13, 2016
    I plan to live in the garage this weekend - let me see if I can grab a few measurements for you :)
     

Share This Page