F355-5.2 Engine Wiring Harness | FerrariChat

F355-5.2 Engine Wiring Harness

Discussion in 'Ad Archives' started by bcwawright, Apr 9, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. bcwawright

    bcwawright F1 Veteran

    Jul 8, 2006
    5,234
    Georgia
    Full Name:
    Bruce
    I have a used 5.2 Engine Wiring Harness and "NEW" GCK(pin connectors and boots) and Installation Tools.

    These harness's are hard to find in good/undamaged working condition and normally sell used for over $1,200.00

    GCK with Installation Tools is approx. $950.00


    $900 plus S/H
     
  2. Badabing!

    Badabing! Formula Junior

    Mar 30, 2014
    731
    NYC
    Is the GCK already installed in the harness?

    Does it come with the sensor side of the GCK?
     
  3. bcwawright

    bcwawright F1 Veteran

    Jul 8, 2006
    5,234
    Georgia
    Full Name:
    Bruce
    #3 bcwawright, Apr 10, 2015
    Last edited: Apr 10, 2015
    The GCK and Installation Tools are NEW, and the pins and boots have not been installed on the wiring harness.

    I am not familiar with the "Sensor Side" you are asking about.....This is not the $1780 Supremo Kit, so if the "Sensor Side" isn't included, these extras can be purchased separately from SRI

    Wiring harness was removed from a 6K mile car back in 2000
     
  4. Badabing!

    Badabing! Formula Junior

    Mar 30, 2014
    731
    NYC
    Sorry I wasn't thinking straight. For a minute I thought the pins on the sensors could be changed too. My bad.
     
  5. bcwawright

    bcwawright F1 Veteran

    Jul 8, 2006
    5,234
    Georgia
    Full Name:
    Bruce
    I looked at the GCK I have at is contains pins and boots for 8ea "3 Terminal Connectors" and 13ea "2 Terminal Connectors"......

    Total of 21ea connections on the Wiring Harness...

    So this Kit is pretty complete...it may be a "SUPREMO" after all.
     
  6. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    13,624
    San Carlos, CA
    Full Name:
    Mitchell Le
    I think the supremo kit also includes the ECU 88 connector pins and the housing
     
  7. bcwawright

    bcwawright F1 Veteran

    Jul 8, 2006
    5,234
    Georgia
    Full Name:
    Bruce
    Not sure about this....last time I talked to Dave the 88 Pin Connector Block for the ECU was not part of the "SUPREMO" kit and was an additional $125.00

    Here is pricing from website:

    Supremo – $1,655.71 (with service plug +$125)
     
  8. bcwawright

    bcwawright F1 Veteran

    Jul 8, 2006
    5,234
    Georgia
    Full Name:
    Bruce
    SOLD!!

    Thanks MR B...LOL
     

Share This Page