F355. Alarm flashing in turning indicators | FerrariChat
Buy

F355. Alarm flashing in turning indicators

Discussion in '348/355' started by Klas, Apr 15, 2016.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Klas

    Klas Formula Junior

    Mar 17, 2014
    364
    Gothenburg, Sweden
    Full Name:
    Klas Nilsson
    #1 Klas, Apr 15, 2016
    Does anyone know if it's possible to get the turn signals to flash once (lock) and twice (unlock) on a F355 with M5.2, as my car is specified to not flash at all, just beeps. I would like to get the flashing, but how? - if possible...
     
  2. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    14,488
    Sydney
    Full Name:
    Ian Riddell
    #2 Qavion, Apr 15, 2016
    Specified? Is this an option?

    If the lights didn't flash on my Euro-based F355, I would assume I had an alarm module problem. As far as I know, the light output is on two separate wires from the module (one for the left side turn indicators, one for the right side indicators).

    If it's an option, there may be a different module, different module programming or simply no wiring from the module (for lights). I had a look at the wiring for the module plug a few months ago. I identified most of the pins:

    http://www.ferrarichat.com/forum/144509447-post10.html

    Cheers
    Ian
     
  3. wrxmike

    wrxmike Moderator
    Moderator Owner

    Mar 20, 2004
    7,674
    Full Name:
    Mike
    #3 wrxmike, Apr 15, 2016
    Last edited by a moderator: Sep 7, 2017
    Strange, because the version of the system that beep also flashes the lights . See page 12 of the attached pdf.
    This could be a fault in the immobilier ecu.

    M
    Image Unavailable, Please Login
     
  4. Klas

    Klas Formula Junior

    Mar 17, 2014
    364
    Gothenburg, Sweden
    Full Name:
    Klas Nilsson
    #4 Klas, Apr 18, 2016
    Yes it´s strange, but the flashing works fine when I press the alarm panic function (press remote button >3s)
     
  5. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    14,488
    Sydney
    Full Name:
    Ian Riddell
    #5 Qavion, Apr 20, 2016
    Could you please clarify this statement? Does your car or alarm handbook say that the lights should not flash for turning off or turning on the alarm?

    Are you seeking help for a faulty alarm or are you looking for a way to change the behaviour of a correctly operating Swedish F355 alarm system?
     
  6. Klas

    Klas Formula Junior

    Mar 17, 2014
    364
    Gothenburg, Sweden
    Full Name:
    Klas Nilsson
    #6 Klas, Jul 3, 2016
    Hi. I am trying to find out if one can change a functioning alarm function from a UK set up (no flashing) to flashing indicator lights when lock/unlock. Can it be done with SW download or something, or do you need to install a new alarm module?
     

Share This Page