F355 Challange suspension rubbing | FerrariChat

F355 Challange suspension rubbing

Discussion in 'Challenge/GT Cars/Track' started by Rix313, Dec 4, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Rix313

    Rix313 Rookie

    Dec 4, 2018
    1
    Full Name:
    Richard Harrison
    Hi every one,

    I recently fitted challenge springs to a 355 to be used for track days. All the parts were supplied from a Ferrari dealer and assembled and installed as per the drawings. One thing that occurred was the spacer between the front front springs, seems to be rubbing on the webbing that strengthens the front turrets, when under load. Has any one else experienced this or is there a mod that needed to be done to eliminate this that I've missed?

    Many thanks in advance.
     
  2. Rothbauer_Racing

    Rothbauer_Racing Formula Junior

    Jan 11, 2007
    442
    Planet Earth
    Full Name:
    Röthbauer Racing GmbH
    slracing likes this.

Share This Page