F355 OBD2 question

Discussion in '348/355' started by spider348, Dec 11, 2007.

  1. spider348

    spider348 Formula 3
    Silver Subscribed

    Nov 3, 2003
    Full Name:
    Have a ’97 F355, my understanding this is an OBD2 car. Listed on the Ricambi site is an adapter OBD2CBL: OBD2 Interface Cable for Ferrari. The listing states the cable is required to allow non-Ferrari shops to connect to the computer system used to test emissions. Apparently the Ferrari connector is not universal. Do I require this cable to get my car tested here in MA? The equipment my garage uses is standard for the majority of cars tested. Cannot get the car there to determine fit due to ice and snow.
    Putting together an order for Daniel and need to know if I should add this adapter. Thanks, John.
  2. To remove this ad click here.

  3. gothspeed

    gothspeed F1 World Champ

    May 26, 2006
    Full Name:
    The OBDII code reader I have (innova 3100) fits the OBD port on my 1997. I believe most smog shops should have adapters if they need them......
  4. UConn Husky

    UConn Husky F1 Rookie

    Nov 11, 2006
    Full Name:
    No special cable should be needed, two local shops connected their system no problem. However there was a service bulletin on the OBDII port to fix one of the pins - mine wouldn't connect and was never updated, so I had the dealer fix it at no charge. Then connected fine, to emissions and my own OBDII reader.

Share This Page