F355 Soft Top | FerrariChat

F355 Soft Top

Discussion in '348/355' started by hozodozo, May 13, 2012.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. hozodozo

    hozodozo Rookie

    Nov 7, 2010
    13
    Calgary
    Full Name:
    Brad Donaldson
    I'm having trouble getting the soft top on my 1995 F355 to go down. It appears to a mechanical jam. The deployment works as normal to start. Seats move and top retracts almost all the way down before getting stuck.

    I have tried to gently push on teh top but it still is getting stuck.

    Any suggestions?

    Thanks
     
  2. greyboxer

    greyboxer F1 World Champ

    Dec 8, 2004
    12,666
    South East
    Full Name:
    Jimmie
    Do not push on the frame and check out all the other threads about 355 spider roofs - if you're lucky its simple like a microswitch or low hydraulic fluid
     
  3. hozodozo

    hozodozo Rookie

    Nov 7, 2010
    13
    Calgary
    Full Name:
    Brad Donaldson
    Thanks. Will check it all out.
     
  4. TomPDX

    TomPDX Formula Junior

    Mar 28, 2008
    558
    Oregon
    Full Name:
    Tom
    When this happened to me, it was because I failed to perform step 4. Step 1, apply e brake. Step 2, undo latch. Step 3, move top back until beep sounds. Step 4, move second overhead bar (the one directly over your head) back until it stops. Step 5, push top button.
     
  5. hozodozo

    hozodozo Rookie

    Nov 7, 2010
    13
    Calgary
    Full Name:
    Brad Donaldson
    Thanks Tom,

    I will make sure I am following the correct sequence.
     
  6. sevminasyan

    sevminasyan Formula 3

    Jun 24, 2008
    1,156
    Glendale, CA
    Full Name:
    Steve
    That overhead bar is important. Make sure its not under strain.
     
  7. gothspeed

    gothspeed F1 World Champ

    May 26, 2006
    10,244
    U.S.A.
    Full Name:
    goth
    +1 ........ :)
     
  8. roadracer311

    roadracer311 Formula 3

    May 6, 2009
    2,398
    San Francisco
    Full Name:
    Paul
    I think step 4 is supposed to be performed automatically by an elastic strap, if I remember correctly. Mine doesn't require step 4, and works normally every time.
     
  9. Labman

    Labman F1 Rookie
    Silver Subscribed

    Jun 25, 2010
    3,801
    Long Island, NY
    Full Name:
    Steve
    I put in a new elastic band and it still doesn't really go back all the way. So I still "help" with step 4. Such a complicated roof these 355 Spiders have!!!
     
  10. 97yellowhorse

    97yellowhorse Rookie

    Jul 29, 2010
    20
    Hey guys looks like I have the samd problem I do all the steps and it makes the beeping sound but no movement at all . If it is the oil what kind of oil do I use thanks for any help. 97yellowhorse.
     

Share This Page