F355 spares available

Hi

I am involved with motor racing in the UK and have come across a hoard of 355 bits which have been stripped off road cars whilst converting them into race cars over the last 10 years. I'm talking about brand new wheel sets with brand new tyres on, removed from brand new cars etc. Complete heads, engine components, some interior stuff, all sorts. All from a reputable source.

The company that has them says they are just in the way now and wants to make room, I will be making a complete inventory hopefully next week sometime so if you need anything post here, PM or email me and i'll let you know.

 

I got dibs on the rims.

 

Possibly heads and throttle bodies

 

Wouldn't have any rear 355 Challenge grills would you?

 

need exhaust manifolds

 

OK guys, got PM's and emails too! I will post back here and reply to messages as soon as I know more, as I say should be sometime next week I'll know more on Saturday.

cheers

Ric

 

I am looking for a complete seat in cream leather... (Preferrably the driver side, but the passenger seat would also do).

LVG

 

nead a pair of heat shield protector on gear box

 

I am going to see the "pile of stuff" tomorrow (Tuesday) and will hopefully create an inventory then (depends on how much there is!). Be in touch with everyone.

 

Richard I am looking for a headlamp lift motor R/H side please PM Me if You can get one.

 

do you have a challenge grill to fit my 1:18 f355 model?

 

wheels and tyres would be good if you get any

 

Would love:
1) Black center console heater adjustment module that always bubbles.
2) 4 Center caps for the stock wheels
3) 355 front grille

Thanks,
David

 

Sorry nothing as rare as that!

 

I'm looking for engine wiring looms, ECU's, Ign modules, Exhaust sensors any chance you can you help?

Regards nick

 

I am also looking for a rear challenge grille.Wheel and tires.Stock cats and mufflers,exhaust manifolds.

 

Im looking for a passenger-side 355 indicator/side light perspex cover.

Also an inside driver's side door handle. The bit you pull up to open the door.

 

OK everyone, having seen all the bits its not as he had described to me, sorry - thought it sounded too good to be true .

There is a set of (effectively) brand new wheels and a few brand new mechanical bits but mainly its all the used bits left from a couple of race cars my friend ran. I am drawing up a list but its generally:

1) 2 pairs of used (race) heads, 2 complete, 2 with cams and (virtually) no valves
2) Set of as new wheels with centre caps
3) Set of Brembo Challenge calipers, used but not very much
4) Pair of Plenum's
5) Full set of as new headlights (no indicators sorry Ade)
6) ABS bits'n'pieces
7) Aircon bits'n'pieces
8) Bag of wheel bolts and Bag of studs/nuts
9) Rear panel (Standard Rosso not Challenge)
10) KM Speedometer
11) Big box of engine components

I'll create a full list but no exhaust components and virtually no interior stuff.

 

Richard,
You have a PM. Cheers

 

I need to check prices with owner now I have compiled a list (I cant believe the retail price of all these bits new!!!!!!!!!!!!!!!!!!!!!! - cheaper to buy a car!). This is a complete(ish) list, I am just sorting photo's out and will post links here.

F355 (from 2.7 cars probably)

NEW
-----
AC Condensor
O-Rings Various
Sensor x2
Sensor x1
Water Oil Heat Exchanger

AS NEW
--------
AC Filter
Emergency Lights x2
Headlight set with surrounds (Rosso) and spot lights
Plenums Pair
Rear Panel (Rosso - not Challenge)
Speedometer KM
2 Rear Wheels (with centre caps)
2 Front Wheels (with centre caps)
Main Oil Hoses

USED EXCELLENT CONDITION
----------------------------
Brake Discs Rear x2
Brembo Race Calipers (Challenge) x4
Cambelt Guards Pair
Compressor Bracket
Crank Pulley
Valve Springs
Valve Tappets
Threaded Collars

USED (remeber off a car that has been raced)
--------------------------------------------
AC Compressor
Air Injection Valves x2
Air Pump with Tank and Solenoids
Airbag Sensors x2
Alternator
AntiRoll Bar Tie Rods x2
Camshaft Tensioners Pair
ECU Cover ABS
ECU (think ABS)
Exhaust Bypass Valve
Handbrake Interior Panel
Cylinder Heads - Complete Pair with Cams and Valves
Cylinder Heads - pair virtually no valves but with cams
Ignition Coil Assembly x1
Looms
Mounts x4 (gearbox or engine not sure)
Oil Filter Assembly
Oil Pumps
Oil Suction Pipes x2
Pistons with Conrods connected x3
Power Steering Reservoir x2
Radiator Tank
Seat Runners
Small Radiator maybe Aircon or gearbox
Throttle Bodies and Injectors
Throttle Link x2
Water Oil Heat Exchanger (maybe)
Water Pumps x2
Wheel Bolts (2 sets need to check)
Wheel Studs and Nuts (Challenge) (1 set need to check)
Wiper Motors x3
Headlight motor x1
+ misc box of brackets and pipes

There are also a pair of 512BB space saver wheels that need restoration.

 

I would like to know the pricing on the rear panel and the Brembo calipers. PM sent

 

OK - pics are available. It may be a couple of days before I can get back to you regarding prices etc. If you want to know any more info about any items then email me using the link on the below website (my PM box here is nearly full ).

Link http://www.motopro.co.uk/355/