Guys Does anyone know the length, internal diameter and more importantly, the springs and load ratings of the OEM 355 springs (NOT the challenge ones). Can't seem to find the info anywhere....
I have a set sitting in my garage, if nobody else has the answer I can measure them - you should be able to figure out the spring rate based on the number of coils and coil diameter.
thanks mate. There is a post in here with that info supposedly in a pdf, but I can't seem to open it...
Right from the WSM: Front: outer diameter: 101.5mm Spring Diameter: 11.5mm Free length: 318mm Static length: 189.4mm Static load: 4071 N +/- 122 N Dynamic length: 133.9mm Dynamic load: 5833 N +/- 175 N Spring rate: 0.3087 mm/N Yellow: 3948-4030 No color:4030-4113 Red: 4113-4193 Rear: outer diameter: 104.6mm Spring Diameter: 12.0mm Free length: 215mm Static length: 153mm Static load: 4383 N +/- 131 N Dynamic length: 96.5mm Dynamic load: 6898 N +/- 207 N Spring rate: 0.2202 mm/N Yellow: 4251-4339 no color: 4339-4427 Red: 4427-4561
Just figured I'd mention here I do have a set of 355 challenge springs if anyone is looking to upgrade...
Not sure he can tell - he needs to measure them so that you can compare as no specs were ever published. Now if the P/N is printed on them somewhere then we can tell from the Challenge manual which set they are
Understood. The part numbers are not printed on the springs but they had either stickers on the spring or on the box. So if he has the original packaging we can tell.
