F355 Tubi muffler with Cats, Y-pipe, by-pass valve

Excellent quality Tubi muffler, Ansa Y-Pipe, By-pass valve, and high flow Cats. The Tubi muffler had a repair to the forward panel at some point. The Cats are very clean with no internal signs of wear. Came from a 3 owner, 1995 Ferrari F355, Berlinetta, VIN ZFFPR41A8S0100421 (2.7 version).

Everything shown in the pictures is included in the sale. I bought the complete drivetrain for a project car but unfortunately the Tubi muffler won't fit behind my gearbox and rear wall so it must go, ugh. I do have the carfax of the donor car but it doesn't disclose ownership name This car had 20,780 miles when it was crunched in the front but it is unknown when this Tubi and Cat set-up was installed. As seen in the last pic, there was no damage to the rear of the car. This 355 must have had best tune of any 355, it had Fabspeed headers (which I'm using) with these Cats and the Tubi muffler!

As a package, I'm selling:

Tubi muffler (fits 1994/95 F355 models)
High Flow CATS (not sure of the brand but may be Hyperflow??)
Ansa Y-Pipe
By-pass valve

I need to sell it all so I've listed all four components at a very fair price of $3200 on this forum. You're basically getting a discounted muffler due to the weld and a free By-pass valve!

At this time I'm not willing to break the package apart so all four items need to go....unless you want to throw a ridiculously high number then perhaps I could be persuaded.

Going on Ebay soon at a higher price. I travel a lot so the best way to catch me is via email at [email protected]

Steven
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login

 

Sorry James, I'm actually using them

 

Tony, we mounted everything together so people can see what is included in the sale. The pipes that would attach to the headers is scrap. My headers are Fabspeed and not included in the sale. We had to cut the collector pipe at the end of the header where it makes a hard turn around my suspension so that's why you see a cut pipe leading to the Y-pipe.

 

The set up on this 95 was Fabspeed headers, I guess hyperflow Cats, the Ansa Y-pipe and the Tubi muffler. The only part of this exhaust that I can use on my 308/358 are the headers.

 

Breaking up the package now.

Tubi muffler: $1700.00
Hyperflow cats: $600 for both
Y Pipe: $700
Bypass valve: $400

 

Nathan, I believe so, let me confirm with Tim.

 

The CATS are sold!

Nathan, I haven't heard back from Tim on the bypass valve but will post as soon as he verifies.

 

Here are more pics of the bypass valve. The bottom needs to be cleaned and repainted. The waste gate operates freely. If I were near these parts I would polish them up but unfortunately I'm not.
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login

 

Price drop on the Tubi muffler, now $1600 + shipping.

Y Pipe still at $700 and bypass valve at $400.

These components are also listed on Ebay with buyer protection.

 

I still have the Tubi muffler, Y Pipe and bypass valve for sale. $1700 for all three pieces.

 

Ferrparts has it and I believe you can see it on their Ebay page.