F355GTS top adjustment | FerrariChat
Buy

F355GTS top adjustment

Discussion in 'Technical Q&A' started by k wright, May 4, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. k wright

    k wright F1 Rookie

    Feb 4, 2004
    2,544
    North East TN
    Full Name:
    Kent Wright
    #1 k wright, May 4, 2004
    I would appreciate help with adjusting the top on my car. It rattles at the front attachment points. After looking it over it appears that the only adjustment available is at the rear of the panel.

    Thanks,

    ken
     
  2. Ferrari_tech

    Ferrari_tech Formula 3

    Jul 28, 2003
    1,527
    UK
    Full Name:
    Malcolm W
    #2 Ferrari_tech, May 4, 2004
    Check for wear in the handle itself, if it's okay then there are shims that are under the striker plate that can be removed or added accordingly. There is also a shim under the handle itself that can be removed. The part number for the shim that fits under the striker plate is #63238700

    Bear in mind that you can either raise or lower the roof by adding or removing the shims, depending on what you need to achieve.

    Check that the handles are secured tightly and that there isn't excessive wear on the rear pins.


    MW
     
  3. k wright

    k wright F1 Rookie

    Feb 4, 2004
    2,544
    North East TN
    Full Name:
    Kent Wright
    #3 k wright, May 7, 2004
    I greatly appreciate the help. The top is now rattle free. On to the dash!

    ken
     

Share This Page