Hey, guys. riddle to you... I readed the firmwares from both ECU of my 360 and how surprised I was when they turned out to be different! how did it work before? left from MT right AT, hex editor show that the firmware is different from the coordinate, all the firmware is red ( these are the differences) Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
I know nothing about software, but it seems that your engine's left and right banks must be reacting differently to sensor information. If you can't sense a rough running motor, the differences must be small.
Yeah, that’s not going to help your engine run well. It’s actually surprising how often I’ve heard about these issues. One of the original ecu’s probably failed years ago, and the owner would have thrown in whatever virgin ecu they could get their hands on. There’s dozens of different firmware versions, including loads of changes to p codes, calibration tables and of course F1/gated setup. Sent from my iPhone using FerrariChat
