F40 Belt / Harness | FerrariChat

F40 Belt / Harness

Discussion in '288GTO/F40/F50/Enzo/LaFerrari' started by Warren_, May 29, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Warren_

    Warren_ Rookie

    Apr 13, 2004
    6
    #1 Warren_, May 29, 2004
    Does anyone know of a good racing harness or seat belt that fits an F40. Preferably a 4 point then I need no extra holes in the car.
     
  2. NSKFlorida

    NSKFlorida Rookie

    Nov 1, 2003
    24
    #2 NSKFlorida, May 31, 2004
    4 point TRW Sabelts are in my car; they work very well.
     
  3. Warren_

    Warren_ Rookie

    Apr 13, 2004
    6
    #3 Warren_, May 31, 2004

    Thanks for the info, I will check them out.
    Warren_
     
  4. rexrcr

    rexrcr Formula 3

    Nov 27, 2002
    1,572
    Kalamazoo, MI
    Full Name:
    Rob Schermerhorn
    #4 rexrcr, Jun 1, 2004
    In a USA car, the upper shoulder harness mounts are already in place. The difficult part is installing the lap belt, and for maximum safety, anti-submarine belt.

    Holes must be cut into the mount brackets and seat upper and lower. Upholstery is required.

    Of course, for a non-USA car, the holes are there, but the belts are too.

    I've performed this addition to many USA F40s.

    Go with TRW Sabelt for authenticity.


    Best regards,

    Rob Schermerhorn
     

Share This Page